Hydrocyclone


Hydrocyclone

Click here to get Trimming lace and parts' price.

Recommendation Index:  

  See more pictures

  Brochure Download (PDF)

  • Description for Hydrocyclone

    Metal Mine Hydrocyclone widely applied in mine-chosen technique in various metal mines.

    It mainly shows in the following works:

    1. Classification for section I closed circuit grinding

    2. Classification for section II closed circuit grinding

    3. Regrinding for fine mine classification

    4. Mud-removing before selection and after selection

    5. Dam and backfill for gangue In closed circuit grinding system, it features high classification efficiency and fine overfall fineness under high mine concentration.

    Classification efficiency is higher for 5-10% than common screw grader. It benefits for enhancing grader utilizing coefficient.Choose proper specification and mode of cyclone according to grinding processing capacity, overfall fineness and sedimentation concentration. This is precondition of getting the most optimized work condition.

     

     

    Structure for Hydrocyclone

    Hydrocyclone is including the upper part of a hollow cylinder, a cylinder is communicated with the lower part of inverted-cone, composed by the two hydrocyclone working cylinder. In addition, a hydrocyclone and ore feeding pipe, an overflow pipe overflow pipe, and the spigot.

     


    Polyurethane Hydrocyclone Working Principle

    Ore-mud can enter the drum with the help of a certain pressure (usually 0.5 to 2.5 kg / cm) and velocity (about 5 to 12 m / sec) that caused by slurry pump, and the ore-mud will rotate with the surface of drum, and cause quite strong centrifugal force, rough or big ore-sand will move downwards with the centrifugal force and gravity. Then they will be discharged from the underside of the cone, whereas some thin sand will be discharged from the overfalling pipe.
     


    Polyurethane Hydrocyclone Features

    The device has features of simple structure, long service life, large disposal capability, small land covering and no driving power consumption. It is a high efficient grading and de-sliming equipment of fine -particle material.

  • Technical Specifications for Hydrocyclone

    Diameter
    mm

    For ore mouth 
    fmm

    I overflow
    fmm

    Shen flow mouth

    Taper

    Cone
    mm

    Cylinder altitude 
    mm

    Overflow with depth
    mm

    Handle amounts
    m3/h

    100

    30×5

    14

    11

    20

    275

    60

     

    1.5-9

     

    30×7

    18

     

     

     

     

     

     

     

    30×10

    26

     

     

     

     

     

     

    125

    25×10

    50

    15-30

    20

    225

    110

     

    2.4-15

    150

    40×8

    20

    15

    20

    326

    100

     

    4.8-54

     

    40×10

    30

     

     

     

     

     

     

     

    40×12

    40

     

     

     

     

     

     

    250

    50×20

    125

    35

    20

    595

    170

     

    6.5-61.2

    300

    75

    125

    50

    20

    800

    200

    200

    24-60

  • Name:      

    E-mail:      *

    MSN:       

    Mobile No.:     

    Content:   

    Verifycode:     

Related Products