Lab Flotation Cell


Lab Flotation Cell

Click here to get Trimming lace and parts' price.

Recommendation Index:  

  See more pictures

  Brochure Download (PDF)

  • Introduction of Lab Flotation Cell

    XFD Series Single Flotation Cell is provided for flotation of minor ore samples in labs of geological,metallurgical,chemical and other industries. Application of Lab Flotation Machine:Laboratory XFD Series single grooved flotation machine is used to the geology, metallurgy, building materials , chemical industry and many other industries. Which get the required sort minerals for laboratory floater little sample ore using. 

     

     

    Lab Flotation Cell Structure

    Laboratory flotation machine with 39 liters is impeller mechanical flotation machine. It is composed by the following main parts: 

    (1). TankThe tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp. In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank 15 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice 17 is installed on the tank cover 14, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate. Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced.

    Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning. The pulp flows into the intermediate tank 15 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover 14 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port 16 is equipped in front and at the back of tank bottom, which is easy to change the technological process. 

    (2)Impeller system Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft 10 and around the vertical shaft tube 12.

    The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover 14. When the impeller rotates, the quantities of air can be absorbed along the vertical tube 12. The protective plate 4 is fixed under the cover 14, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately. The hole of vertical tube 12 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft 11 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor 18 rotating through the triangle belt, of which the tension can be adjusted by the nut 19. 

    (3) Shaving foam deviceFoam is scraped using the rotary scraper along the flotation machine. The scraper 20 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer 21 and V-belt.


  • XFD single grooved Laboratory Flotation Cell  Technical parameters

    Model

    Volume

    Impeller Diameter

    Impeller speed

    Scraper speed

    Feed size

    motor power

    Weight

    L

    mm

    r/min

    r/min

    mm

    w

    kg

    XFD0.5

    0.5

    Φ45

    0-2800

    30,20

    ≤0.2

    90

    28

    XFD0.75

    0.75

    Φ45

    0-2800

    30,20

    ≤0.2

    90

    28

    XFD1

    1

    Φ55

    0-2800

    30,20

    ≤0.2

    90

    28

    XFD1.5

    1.5

    Φ60

    0-2800

    30,20

    ≤0.2

    90

    30

    XFD2

    2

    Φ65

    1590-1910

    15,30

    ≤0.2

    90

    32

    XFD3

    3

    Φ70

    1200-2000

    30,20

    ≤0.2

    250

    32

    XFD5

    5

    Φ73

    1544-1890

    7.9,19.1

    ≤0.2

    250

    58

    XFD7

    7

    Φ100

    1400

    8.6,12.9, 17.2

    ≤0.2

    250

    70

    XFD8

    8

    Φ100

    1400

    8.6,12.9, 17.2

    ≤0.2

    250

    72

    XFD12

    12

    Φ130

    700-1100

    26,20

    ≤0.2

    370

    80

  • Name:         

    Pid:         

    E-mail:         *

    MSN:           

    Mobile No.:  

    Content:      

    Verifycode:    

Related Products