Lab Magnetic Separator


Lab Magnetic Separator

Click here to get Trimming lace and parts' price.

Recommendation Index:  

  See more pictures

  Brochure Download (PDF)

  • Small Lab Magnetic Separator Structure

    XCQS wet magnetic separator consists of two parts, the main body and drum power supply. The main body the magnetic separator mainly includes: (1) frame (2) magnetic drum (3) ore tank (4) spray pipe (5) transmission device (6) feed tank. 

     


    Small Lab Magnetic Separator Structure Details

    1. Frame: The frame is welded by angle iron. It is the· supporting part of the whole machine. 
     

    2. Magnetic drum: Four excitation coils and magnetic cores are installed inside the magnetic drum. Besides, an interpole is without excitation coil is installed at the side of the magnetic drum along which the ore is discharged, to facilitate the discharging of ores. These form a sector and are fixed on the mandrel. The mandrel is fixed on the frame through bearing bushing. The drum is made of non-magnetic aluminum and stainless steel. The connection of sector coil causes the alternation of magnetic field polarity on every magnetic pole palm. The ore grains turn 180°each time it passes one magnetic pole. Under the action of magnetic stirring, the quality of magnetic products can be improved. At one end of the mandrel is square extension structure which can be pulled by hand, to get the magnetic pole in the magnetic drum to rotate axially so that it can meet the requirements for the sorting of different ore types. 
     

    3. Transmission device: The transmission device is installed at one side of the bottom of the frame. To lower the center of gravity of the machine, the transmission part is composed of three phase alternating current motor, worm gear and worm gear box. The output of gear box is transmitted to the magnetic drum through chains, to drive the rotation of magnetic drum (the magnetic pole does not rotate with it). The magnetic drum rotates at a constant speed of 25 R/min. The direction of rotary force of the magnetic drum is consistent with the direction of ore feeding. 

    4. Feed TankThe feed tank is welded by aluminum and stainless steel plate. It is fixed on the frame with screws. An overflow mouth to keep the liquid level is set at the side of feed tank along which ores are fed. Concentrate feeding mouth is set at the bottom of the concentrate discharging tank to receive ores. 

    5. Spray PipeA copper pipe with hole installed on the frame is connected to the indoor water source and is used to wash the concentrate on the magnetic drum. The spray angle can be adjusted through the rotation of spray pipe. 

    6. Feed TankThe feed tank is welded by stainless steel plate which is used to ensure the homogeneity during material feeding. 


  • Technical Sepcifications for Small Lab Magnetic Separator

    Model

    XCRS400×300

    XCRS400×240

    Magnetic impeller size

    mm

    Φ400×300

    Φ400×240

    Rotating speed

    r/min

    25

    25

    Intensity

    GS

    1250
    (100KA/m)

    1250
    (100KA/m)

    Separating size

    mm

    <2

    <2.5

    Capacity

    kg/h

    20~60

    20-50

    Power

    kw

    0.25

    0.25

    Voltage

    v

    380

    380

    Exciting voltage

    sets

    1

    1

    Overall dimensions

    mm

    1515×1040×1500

    1030×614×1196

    Weight

    kg

    300

    200

  • Name:         

    Pid:         

    E-mail:         *

    MSN:           

    Mobile No.:  

    Content:      

    Verifycode:    

Related Products