Carbon in pulp


Carbon in Pulp

Gold Carbon-in-pulp (CIP), Gold CIP Production Line

Gold Carbon-in-pulp (CIP) production line is an extraction technique for recovery of gold which has been liberated into a cyanide solution as part of the gold cyanidation process. 

High Efficiency

When the grade of gold loaded carbon reaches 3000g/t, desorption rate can reach more than 96%.

Low energy consumption

Due to the same temperature and fast working, the energy consumption is 1/2-1/4 of regular system.


The time of desorption electrolysis is 12 hours shortened by 50-70%. With three security measures, system intelligent.

No cyanide&Automatic control

Without adding NaCN in desorption solution, installed level liquid control system, temperature control system.

50T Gold Cip process
JXSC 50T Gold Cip Process
300T Gold cip process
15T Gold CIP process
10T Gold CIP Process

Carbon in pulp process

Gold Carbon-in-pulp (CIP) production is the sequential leach, then absorption of gold from ore. During the CIP stage, pulp flows through several agitated tanks where sodium cyanide and oxygen have been added to dissolve gold into solution.

CIP process is suitable for the treatment of oxidized gold ore with low sulfur content and mud content. It is unsuitable for the gold ore with high grade silver as well. Generally, the proportion of gold and silver should not exceed 1:5. The best conditions for CIP process in China: PH=10-12, sodium cyanide concentration is not less than 0.015%, the particle size of activated carbon is 1.0-3.35mm, the best choice of carbon is coconut shell activated carbon, and the slurry concentration is 40-45%.

  1. Crushing and Screening
  2. Grinding and Classification
  3. Thickening
  4. Leaching
  5. Adsorption
  6. Desorption of Gold-loaded Carbon and Electro-deposition

There are several desorption methods. In China, the general application methods are Zadra desorption method, high temperature, and high-pressure desorption method (hereinafter referred to as HTHP method) and integral pressure desorption method (hereinafter referred to as IP method).

300T/P CIP Equipment list

No. Product name Model Qty Motor Power(kw)
1 Trough feeder 980*1240 1 7.5
2  Jaw Crusher 400*600 1 30
3 Jaw Crusher 250*1000 1 30
4 Vibrating screen 1500*3000 1 7.5
5 Swing feeder 600*600 1 1.5
6 Ball mill 2100*3600 1 210
7 Ball mill 1500*4500 1 110
8 Spiral classifier Φ2000 1 11
9 Mixing tank Φ2000 1 5.5
10 Mixing tank Φ1000 2 1.5
11 Mixing tank Φ1000*1500 1 3
12 Hydrocylone Φ250 2  
13 Thickener Φ12000 1 3
14 Leaching agitaion tank Φ3500*4000 9 4
15 Linear Vibrating Screen 400*1600 3 0.25
16 Lifting carbon machine   7  
17 Carbon Screen   7 0.25
18 Slurry pump 3/4 6 22
19 acid pump 1.5 inch 1 3
20 Roots blower 200 1 45
21 Desorption electrolysis system 300kg 1 30

Please prove you are human by selecting the Star.